HKD DOMO-DW-FL
- Use in lining pipe provided by the customer or WU concrete core drilling (white tank)
HKD DOMO-DW-FL
added to
.
HKD DOMO-DW-FL
removed from
.
Technical details
- Tested in accordance with FHRK test basis GE 101 (No. G 30 322-2-6) - FHRK 40 LD10
- Tight against pressing water (40 mm sealing width)
- Radon-tight - in accordance with FHRK data sheet MB 101. Meets the requirements for radon precaution areas
- Installation from the side facing the pressure (water side)
- All metal parts made of stainless steel 1.4301 (V2A/Inox 304), optionally 1.4571 (V4A/Inox 316)
- Seal material EPDM solid rubber, optionally NBR
- Gas-tight
Areas of use
- Use in lining pipe provided by the customer or WU concrete core drilling (white tank)
Product benefits
- The HKD DOMO-DW-FL is characterized by its robust craftsman quality.
- The design with large ring for absorbing pressure loads on one side and for axial fixing.
- All metal parts made of stainless steel 1.4301 (V2A/Inox 304), optionally 1.4571 (V4A/Inox 316)
- Seal material EPDM solid rubber, optionally NBR
For further dimensions per DN, see page 2. All special seals deviating from the standard are supplied as type HKD DISO with 40 mm EPDM elastomer, from DN 800 with 2 x 40 mm EPDM elastomer, against pressing and non-pressing water and in stainless steel 1.4301 (V2A / Inox 304). Optionally, the HKD DISO is also available in stainless steel 1.4571 (V4A / Inox 316) and with other elastomer compounds, e.g. NBR.
