Building owner's packages and house entries

The best solution for all buildings. Building owner's packages complete with the necessary accessories from the experts!

Building owner packages for supply lines

More and more utility companies are shifting responsibility for the professional sealing between the building entry point and the building structure to the building owner or developer. However, selecting products that comply with the various regulations is often difficult. That is why DOYMA has worked with many utility companies to develop a standard that greatly simplifies the sometimes difficult selection of products and covers most applications. With our specially tailored builder packages, you are always on the right side, save valuable time and can concentrate on your actual work.

Bet 4 times on Plus now:

  • Proven radon-proof.
  • Pre-assembled components.
  • 25-year warranty.
  • Components cannot be lost.

To the complete range of building owner packages

 

TOP 3 FAQs: Sealing Systems

For structures made of waterproof concrete in accordance with the WU guideline, the sealing insert can be installed in a core hole. However, we recommend installing it in a liner pipe.

If the wall is constructed of masonry or a similar material, a liner pipe is required when using sealing inserts.

Curaflex seal inserts are maintenance-free. When installed correctly, it is not necessary to retighten the hex nuts.

Depending on the circumstances, the following accessories are available:

A) For single-layer, loosely laid, hard, or thin (< 2 mm) waterproofing membranes, EPDM inserts 1775 (2 pieces of EPDM cut-to-size, adapted to the selected fixed-loose flange system) are recommended

B) For thick coatings (e.g., KMB), the Curaflex 1776 accessory (foam rubber spacer rings and a glass fiber mesh to be incorporated into the KMB) is recommended; if necessary, a suitable hole punch may also be recommended.

THE COMPLETE DOYMA FAQ SECTION
AT A GLANCE!

More DOYMA Knowledge2GO

View now

Share this page