HKD DOMO-NW-Z

The HKD DOMO-NW-Z is characterized by robust craftsman quality. The design with fixed and loose flange construction according to DIN 18195 / DIN 18533. With ggv corrosion protection coating.

  • Against non-pressurized water
  • use in on-site lining pipe or concrete core drill hole for structures with waterproofing membranes or thick coating (black tank)
  • Tested according to FHRK test specification GE 101 (No. G 30 322-2-7) - FHRK 40 D01
  • tight against non-pressing water (40 mm sealing width)
  • Radon-proof - according to FHRK leaflet MB 101 
  • Meets the requirements for radon precautionary areas
  • Installation from the side facing the pressure (water side)
  • all metal parts made of steel with ggv anti-corrosion coating
  • optionally all metal parts made of stainless steel 1.4301 (V2A/ Inox 304), optionally 1.4571 (V4A/ Inox 316)
  • sealing material EPDM solid rubberdepending on the sealing sheet, with Curaflex® allowances (1775) for thin and hard sheeting orAccessories for thick coatings (1776): Sanding of the contact surfaces contact surfaces of the fixed and loose flange
  • Variant: HKD DOMO-NW-Z-K - properties as described above, however described above, but bracing of the pipe from the non-pressure side
  • gas-tight
  • all metal parts made of steel with ggv anti-corrosion coating
  • optionally all metal parts made of stainless steel 1.4301 (V2A/ Inox 304), optionally 1.4571 (V4A/ Inox 316)
  • Sealing material EPDM solid rubber

Allowances and accessories, see Curaflex® Accessories