Aquagard core bore sealant

Pre-cut reinforcement steel must be protected against corrosion.Moreover, concrete can absorb moisture up to a certain depth before absolute water impermeability occurs. This makes it possible for water to migrate around the gasket insert. Aquagard core bore sealant prevents this. Based on these findings, we recommend pre-treating the core bore with Aquagard.

Aquagard primer (Type 1710/1711)

• Primer for Aquagard special paint
The primer penetrates deeply into the capillaries and air bubbles in the concrete and seals them permanently and watertight. In this way, water cannot migrate around the seal insert. The primer is applied with a brush or roller.

Aquagard special paint (Type 1715/1716)
• Special paint for sealing core holes
The Aquagard special lacquer seals the surface of the core bore wall and at the same time protects the possibly cut reinforcement steel from corrosion. The special paint is also applied with a brush or roller.

Aquagard preservation (large)
• Aquagard primer 1 liter for 4.0 m² (Type 1710)
• Aquagard special paint 1 liter for 3.5 m² (Type 1715)

Aquagard preservation (small)
• Aquagard primer 1/3 liter for 1.5 m² (Type 1711)
• Aquagard special paint 1/3 liter for 1.0 m² (Type 1716)