Quadro-Secura® multi-compartment building owner’s package All inclusive for buildings without basements

• Multi-compartment house lead-in as a series version.
• With adhesive flange in accordance with DIN 18533 for connecting waterproofing or radon foils to the floor slab.
• Use in unfinished structures to be made from waterproof concrete.
• For the following building services: gas, water, electricity and telecommunications.
• Completely equipped with the required accessories.
• No on-site leak test in accordance with DVGW G459-1 required

• DVGW-approved products as per VP 601 (B1)
• All building services are pre-assembled and given dummy plugs that are leak-tight against gas and pressing water
• Certified leak-tightness for gas and pressing water in accordance with DIN 18322: maximum safety by separating all supply lines
• The sealing system is certified as ‘radon-tight’
• Compact and space-saving installation of building and mains connections and associated fittings
• Flexible assignment of individual compartments possible
• Subsequent replacement of pipes possible (relining)
• Supply pipes can be laid independently from construction progress
• Universal sealing for all standard pipe diameters
• Can be used for all standard flexible gas house lead-in combinations/ sealing for RMA and Schuck lead-ins included in package
• Bend-resistant jacket pipe for compliance with bending radii
• Jacket pipe systems pressure-tested at the plant (test seal)
• Sealing for disposal pipes included in package (four HKD wall collars)
• No on-site leak test in accordance with DVGW G459-1 required

1x Quadro-Secura® Nova R4-I
Installation part including pre-assembled building service seals:

• Gas: DN 25 RMA and Schuck gas house lead-ins
• Water: Outer diameter 32, 40, 50 mm
• Electricity: Outer diameter 26–36 mm
• Telecom: Up to seven lines with 2 × 5–7 mm, 3 × 7–13 mm, 1 × 14–18 mm and 1 × 19–22 mm

1x Quadro-Secura® Nova R4-R
cast-in part for embedding in the floor slab, including bend-resistant jacket pipes with nominal/outer diameter 90 (inner diameter 78), (lengths: 3 m, 6 m, 10 m or 15 m).

4x Connecting sleeves (2726) for extending the bend-resistant jacket pipes.

4x Jacket pipe end plugs (2704) for sealing the jacket pipes and lines.

1x Schuck extension set for sealing the Schuck gas house lead-in (RMA pre-assembled)

4 x HKD wall collars DN 100 for sealing disposal pipes in concrete walls or floor slabs made of waterproof concrete

1 x Lubricant (2780)